< Back

Mathey Dearman MagnaCut

Dearman MagnaCut

1 (800) 461-1847

Mathey Dearman's revolutionary MagnaCut XM enables the welder and pipefitter to cut, bevel, and even weld steel pipe and steel plate without having to secure the machine to the work surface by means of chains, clamps, or any other device. The secret is in the MagnaCut’s magnetic wheels that secure the machine to the surface with 300lbs of pull. Inside the wheels are rare-earth magnets, the strongest permanent magnets made.

It will cut materials with wall thicknesses from .280” (7mm) to 3" (76mm) using either a plasma or an oxy/acetylene cutting torch. When cutting steel plate, the use of a 1”x 1” x 1/8" angle iron as a guide strip ensures perfectly straight tracking. In addition, the remotely-operated motor control box allows the machine to cut in hard-to-reach locations such as overhead pipes and vertical walls. Even on pipe or plate with coating material up to .015 (.4mm) thick, the MagnaCut XM tracks straight, and the torch-to-work surface distance is held constant.

Advantages

  • MINIMUM SET-UP TIME—just set the distance between the torch tip and the work surface
  • VERSATILE—cuts pipe, plate, walls and overheads
  • SAFE—Speed and direction of both machine and torch arm speed are remotely controlled
  • AMAZING HOLDING POWER—strong rare-earth magnets hold fast to any magnetic receptive surface with coating up to
    .015" (.4mm) thick.
  • FAST—Up to 80% faster than cutting by hand.