Mag Drills & Punches
Unibor E50
Drill Capacity 2” x 2” Cutter
A popular jobsite workhorse with a high-speed gear ideal for carbide-tipped cutters, and a lower-speed gear for standard M2 cutters. Powerful motor for use in high duty-cycle environment.
Request a Quote
Features
- 2” x 2” hole drilling capacity.
- 3/4” twist drilling capacity.
- Pwerful 2 speed motor.
- #2 morse taper drive.
- Liftshield equipped.
- 1.47 Horsepower.
- 1100 W / 10 Amps.
- Motor speed 250 / 450 RPM.
- Annular cutter capacity 2” / 50 mm diameter, 2″ depth.
- Height 21” / 533 mm with 1″ depth cutter installed.
- 7-1/8″ stroke.
- Magnet dimensions 4″ x 2-3/8″ x 7-1/8”
- Magnet strength 1999 lbs. / 907 kgs (minimum).
- Weight 41.8 lbs. / 19 kgs
- Shipping weight 50.4 lbs / 22.9 kgs
- Arbour type 2″ morese taper 3/4” straight shank with 2 set screws
Specifications Table
| CUTTER CAPACITY | 2” |
| DEPTH OF CUT | 2” |
| DRILL CHUCK CAPACITY | 5/8” |
| MORSE TAPER | MT2 |
| NO LOAD SPEED | 250 – 460 RPM |
| MOTOR SPECIFICATION | 1100W |
| MAGNET ADHESION | 2090 lbs |
| LENGTH | 10 53/64” |
| HEIGHT | 22 41/64” |
| WIDTH | 9 1/4” |
| MAGNET SIZE | 7 3/32” x 3 15/16” |
| WEIGHT | 41.9 lbs |
| MOTOR | 120V |
| STROKE | 4 3/16” |
Delivery Reach
We deliver throughout North America. From the moment an order is received, our total focus is to ensure deliveries are shipped out as soon as possible and meet the exact specifications requested.
Need Assistance
Not sure how to operate your equipment? Don’t know which model is best for your project? If you have any technical questions, please feel free to call us at 1 (800) 461-1847.